AKRA & WKA Approved
PVL is known for making quality flywheels. This flywheel is dynamically balanced and has been tested by PVL at 17,000RPM. The steel center hub adds durability to keep from damaging the taper. The center hub also has tapped holes for the use of a flywheel puller.
Performance Information
The PVL flywheel fin design allows it to move a very high volume of air. It is recommended that you leave only 1 of the blower housing recoil air intakes open. If more cooling is desired then the tape can be removed. The engine will perform best when you have the right amount of cooling to keep the engine from reaching an excessive temperature.
Ignition Timing
The flywheel works with the standard OEM clone coil with a recommended coil gap of .038-.040". The running timing with a straight up key is 28 degrees and it is recommended to start with a running timing between 28 to 31 degrees.
Testing of the PVL Flywheel
PVL, the manufacturer, tested the flywheel at 17,000 rpms and an independent company in the USA tested the flywheel at 15,000 rpms for 60 minutes, both without failure.
These testings do not verify or guarantee the safety, suitability, use, or the fitness of this flywheel. Racing is dangerous and exploding parts can cause injury or death.
Flywheel Removal
The flywheel comes with two 5/16-24 threaded holes in the steel hub for the use of a standard 2 bolt puller for removal.
Prying or beating on the PVL flywheel, or any other flywheel, can cause damage that could lead to the flywheel exploding.
PVL is known for making quality flywheels. This flywheel is dynamically balanced and has been tested by PVL at 17,000RPM. The steel center hub adds durability to keep from damaging the taper. The center hub also has tapped holes for the use of a flywheel puller.
Performance Information
The PVL flywheel fin design allows it to move a very high volume of air. It is recommended that you leave only 1 of the blower housing recoil air intakes open. If more cooling is desired then the tape can be removed. The engine will perform best when you have the right amount of cooling to keep the engine from reaching an excessive temperature.
Ignition Timing
The flywheel works with the standard OEM clone coil with a recommended coil gap of .038-.040". The running timing with a straight up key is 28 degrees and it is recommended to start with a running timing between 28 to 31 degrees.
Testing of the PVL Flywheel
PVL, the manufacturer, tested the flywheel at 17,000 rpms and an independent company in the USA tested the flywheel at 15,000 rpms for 60 minutes, both without failure.
These testings do not verify or guarantee the safety, suitability, use, or the fitness of this flywheel. Racing is dangerous and exploding parts can cause injury or death.
Flywheel Removal
The flywheel comes with two 5/16-24 threaded holes in the steel hub for the use of a standard 2 bolt puller for removal.
Prying or beating on the PVL flywheel, or any other flywheel, can cause damage that could lead to the flywheel exploding.
To see the membership pricing displayed simply create an account or log in and the discounted pricing and any associated quantity based discounts will be displayed. You can add the membership to the cart and all the pricing will be discounted through the entire store so you can purchase a little or as much as you want and proceed to checkout. Once the order is received you will get a email back from us explaining that your account is active and to log out and log back in and the pricing will be in affect for the next 12 months.
Click Here For More Details On How It Works
Click Here To Submit A Ticket If You Need Further Assistance
We ship exclusively through UPS and below is a transit map that will give you an ESTIMATED time in transit based on the color chart.
All Orders placed by 2pm M-F unless otherwise noted (holidays, weather etc.) will ship the same day and any orders after that can ship out until 4pm but we cannot make any guarantees
UPS:
For a more detailed delivery date CLICK HERE and in the ship from information use Conway - 29526
1-5lb - $15.00
5-10lb - $17.00
11-15lb - $19.00
16-20lb - $24.00
21-29lb - $30.00
Anything over 30lb or items that are considered oversized, the store will automatically remove the UPS option and the only thing displayed will be "Ground shipping will be added once order is received" This will give us the ability to calculate the shipping accurately as it may need to go in multiple boxes or the box is oversized. For a breakdown of how pricing is calculated CLICK HERE
All of our return and order complication information can be found in our help center and if there is a situation that is not covered, please submit a ticket through the link below
Click Here For Help on Returns-Exchanges-Damaged-Missing Items